Yes, the 17mm deep-penetrating sensor reads through most surface coverings including ceramic tile, vinyl, laminate, and thin carpeting. This allows detection of moisture problems beneath flooring materials without removal, saving time and preventing unnecessary demolition.

Softwood mode calibrates for framing lumber and pine, hardwood for oak and maple flooring, concrete for basement slabs and foundations, masonry for brick and block. Selecting the correct mode ensures readings account for each material's unique moisture characteristics.

The color-coded display simplifies interpretation: green indicates safe levels below 17%, yellow warns of elevated moisture between 17-20% requiring monitoring, and red signals critical levels above 20% where mold growth and structural damage become likely.

DriCorem works effectively on painted, stained, and sealed surfaces. The electromagnetic technology penetrates coatings to measure moisture in the substrate material itself, providing accurate readings regardless of surface treatments that would interfere with pin meters.

Standard 9V battery provides approximately 12 hours of continuous operation. The customizable auto-shutoff feature extends battery life significantly during intermittent use, and low-battery indicators provide advance warning before power depletion during critical assessments.

Absolutely. The 30-reading memory function is specifically designed for tracking drying progress. Take baseline measurements, then monitor the same locations daily to document moisture reduction and determine when materials have reached safe levels for reconstruction.

DriCorem features an intuitive interface requiring no training. Simply select the material mode, place the sensor against the surface, and read the color-coded display. Most users achieve confident operation within minutes of first use.